- Gemini Home
- Telescopes and Sites
- Science Visitors at Gemini
- Observing With Gemini
- Retired Instruments
- Interface Specs for VI
- Visiting Instrument Policy
- DSSI Speckle Camera (North)
- TEXES (North)
- Integration Time Calculators
- Magnitudes and Fluxes
- Near-IR Resources
- Mid-IR Resources
- Observing Condition Constraints
- Performance Monitoring
- SV/Demo Science
- Future Instrumentation & Current Development
- Queue and Schedules
- Data and Results
Change page style:
T-ReCS contains up to 20 filters mounted in two wheels. This page describes the current set of filters.
The temperature is that of the filter measurement (there is only a very small change in bandpass between 77K and the operating temperature).
(a) Also used as continuum reference for PAH 8.6um filter.
(b) Normally used as continuum reference for [NeII] filter.
(c) Also used as continuum reference for [Ar III] filter
(d) The Q-broad filter is only recommended for spectroscopy mode. Use with imaging mode will result in saturated images given the width of the band.
(e) The K, L and M filters are useful for target acquisition (of bright targets) but are not routinely available for science observations due to the low detector efficiency at short wavelengths.